JOWA SEAGUARD-BILGE ALARM-MONITORING AND CONTROL SYSTEMS 15PPM Bilge Alarm Ship monitoring system.


JOWA SEAGUARD
BILGE ALARM
MONITORING AND CONTROL SYSTEMS

We can supply all 15PPM Bilge Alarm / Recording / Alarm / Oil discharge / Ship monitoring system. 
We maintain a large inventory of Instrumentation & Automation related items and their Spare Parts, as well as entire units are provided immediately and at highly competitive price.

For more details feel free to contact / email us info@dutchmarinesupply.com

The JOWA SEAGUARD 15ppm Bilge alarm is designed to monitor the effluent from a bilge water separator. The alarm is approved to IMO MEPC 107(49).


The JOWA SEAGUARD log is controlled by a signal from the separator and is saved on a removable SD card.
There are 2 alarms out signals which are triggered by the ppm oil content of the separators effluent.
The JOWA SEAGUARD has a cleaning function, auto flush, designed to keep the sensor as clean as possible. Auto flush occurs automatically.

Specification:
Range: 0-30ppm, trend up to 40ppm
Approval/Accuracy: According to IMO MEPC.107(49)
Display: 20 x 4 characters LCD with Backlight
Power Supply: 115-230 VAC 50/60Hz Automatic voltage selection
Power Consumption: <15VA
Alarm Points 1 + 2:  Adjustable between 0-15ppm
 Factory setting 15ppm
System fault alarm: Red LED light (flashing)
Alarm 2 Operating delay: Adjustable between 0-540 seconds
Factory setting 0 seconds
Alarm contact Rating: Potential free 1 pole change over contacts; 6A/250V
Alarm 1 Operating delay: Adjustable between 0-10 seconds
 Factory setting 0 seconds
Alarm indication: In LCD & Red LED light
Output signal: 0 – 20mA or 4 – 20mA for 0 –   40ppm, ext. load max 150 Ω
Sample water pressure: Nominal 2 bar
Ambient temperature: +1 to +60 degrees Celsius
Sample Flow: Nominal. 2l/min depending on pressure
Sample water temperature: +1 to +60 degrees Celsius
Size: 360 x 240 x 150, LxWxD
Roll: Up to 45 degrees
Weight: 7,5 kg
Degree of protection: IP 65
Pipe connections: R ¼” Female

I take immense pleasure in introducing Dutch marine supply, 15 years of experience. We have in-house NDT facilities; we have full facility to perform reconditioning of Diesel Engine & Spares, Air / AC Compressors, Oil Purifiers, Electric Motors, Fresh Water Generators, Heat Exchangers. 



We can supply the required Units or Spare Parts immediately 
to our customers, anywhere in the world.

→ For pricing and any other details Email us AT ←

Info@dutchmarinesupply.com
dutchmarinesupply@gmail.com